Challentec (Wuxi) Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Jiang Ren
  • Company Name : Challentec (Wuxi) Co., Ltd.
  • Tel : 86-510-68868712
  • Fax : 86-510-68868735
  • Address : Jiangsu,Wuxi,Building B, ZX Park, 3 Yuanxi Road
  • Country/Region : China
  • Zip : 214125

10KW WIND TURBINE

10KW WIND TURBINE
Product Detailed
Designed with a single objective "to launch a 10KW turbine with a better economic return than any other product in the market".

                                      

                                

      A New Standard for Small Wind Turbines

      Designed to produce more power than any other equivalent turbine

      10kW @ 9 m/s

      5 Year Warranty

      MCS / AWEA / 61400 certification in progress

      The WINForce 10kW is an intelligent control upwind turbine designed using the same principles as large commercial turbines ensuring the most cost effective power production possible.

      Maximum power production

      • Intelligent upwind control design

      • Manufactured according to the most advanced quality standards.

      • Producing full power at a lower wind speed than almost any turbine of equivalent size

      Maximum power production, design life, and economic essential maintenance depend on considering a wind turbine as a complete system and designing every part to work together including: Generator, Controller, Inverters, Blades, Hub, Tower,Foundation and very importantly the principle of mechanical design for low cost maintenance.

      A Better Economic Return - Maximum Power Production and Long Design Life

      A Complete System

      Full 10 kW at 9 m/s Wind Speed from the Highest Possible Specification Generator

      • 90% efficient at rated speed

      • Very high efficiency at all RPM

      • Design life > 20 years

      •38 poles for a maximum power production

      • Aviation grade copper

      For every installation WIPO Remote Monitoring System allows the customer to check via the internet the power production of his turbine. WIPO Remote Monitoring also monitors every aspect of the system performance giving an early indication of system faults and, in extreme situations allowing remote shut down to prevent serious damage.

      For off-grid use : WICo 48 Volt Intelligent Battery Charge System

      The most advanced small wind turbine battery charge control system

      Trickle charge from 3,5 m/s.

      Maximum charge 10 kW.

      Set to optimum battery charge parameters

      3 AC circuits utilise all power produced when battery fully charged.

       For on-grid use: 2 x 5kW Challentec Inverters

      Use either Challentec 2 x 5 kW (certification pending) or the Aurora Power

      One 2 x 6 kW or the Aurora Power One 10kW for grid connection. The ecommendation to use 2 inverters is following exactly the same principle as commercial megawatt turbines because an inverter is most efficient near its peak power point.

      • Over voltage protection

      • Inbuilt isolation transformer

 

10KW WIND TURBINE



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.